H0001
 
 There are no search results to view

 You told VLR you want to view your
 search results but you have not done
 a search.

H0002
   
   Detailed help is not available

The VLR help file (VLR.HLP) does not
exist. This file must be stored in the
same drive and directory as the program
file (VLR.EXE).

It may be necessary to re-install the
hyperbook.

The author may have chosen not to
to include the program help file.

H0003

The author has chosen not to include an
index. You may still be able to locate
a reference using the Search function.

H0004
 There are no more matches of the
 specified string in this module.
 
 The cursor location remains unchanged.
H0005

         Notepad full

You are attempting to add more lines of
text to the notepad than it is capable
of holding. Delete some lines and try
again.
H0006
 VLR scanned the module from the current
 cursor location to the end of the 
 the module and could not find the 
 specified target text. The cursor 
 remains at the same location.
H0007

VLR tried repeatedly to send text to the
printer but did not get any response.

Make sure that there is a printer
attached to LPT1. The printer must have
paper loaded and must be online.

If you are attempting to print to a
network printer, check with your network
administrator.
H0008
           Printing complete

The text was sent to the printer and the
printer has acknowledged receipt.

H0009

VLR attempted to save data to a file but
was denied access.

You may have specified an invalid file
name or may be attempting to save to a
disk that does not exist.

If you are saving to a diskette, ensure
that a formatted diskette is in the
drive and that the drive door is closed.

If you are on a network and are saving
to a network drive, check with your
LAN administrator to ensure you have
WRITE access to the specified directory.

H0010
          Module not found

VLR tried to load the specified module
but could not find it.

This may indicate an installation error
or that a required file is missing.
The book should be re-installed.

H0012
           Printing cancelled

You told VLR to stop send text to the
printer.

H0014
        You have no bookmarks
 
You told VLR to display the bookmark
list but you have not previously defined
any bookmarks.

To create a new bookmark choose the EDIT
Menu and select CREATE BOOKMARK.

H0015
         No matches found
There no matches to the specified search
string.
H0016
You told VLR to stop searching. View the
Search Results module for a list of hits
before you cancelled the search.
H0511
 Use Open (or press Enter) to open 
 the hyperbook module referenced by 
 the text under the cursor. 

 When you open the referenced module,
 the current module will become the 
 parent module. You will be able to 
 return to your current location by 
 pressing the Escape key.
H0512
Use Save to copy the contents of the 
current module in the view window to 
disk. The Save command will ask you 
for a name.

If the disk file already exists you will
be asked if it should be overwritten.

You can save

        . The current module
        . Selected text
H0513
Use Close (or press Escape) to close the 
current module and return to the module 
which was active when this module was 
opened.
H0514
Use Print to generate a copy of text on 
paper.

You can print 
     . The entire hyperbook
     . Modules referenced by the current 
       module
     . The current module
     . Selected text
     . Modules referenced in the 
       selected text.
H0516
Use Exit to leave the program when you are 
finished reading the hyperbook. 
H0521
 Use Cut (or press Delete) to remove
 selected text from the active module 
 and put it in the clipboard. 

 You can only Cut text from the Notepad,
 Bookmarks module and History module.

 You can then use Paste (shift+insert)
 to copy this text into an active
 notepad window.
H0522
  Use Copy (or press Ctrl+C)  to copy 
  selected text from the active module 
  and put it in the clipboard. 

  You can copy text from any module.

  You can then use Paste (shift+insert)
  to copy this text into an active
  notepad window.
H0523
  Use Paste (or press Shift+Insert) to 
  copy the contents of the Clipboard
  into the active notepad. 

  The notepad must be displayed before
  you can paste into it. The text will
  be pasted at the current cursor 
  location.
H0525

           Append to Notepad

 Use to add selected text to the end 
 of the notepad. This is a shortcut 
 method of copying and pasting text 
 into the notepad.

H0526

           Create Bookmark

 Use to create a link reference to the
 current module in your bookmark list.
 You can create up to 1024 bookmarks.

H0531
 The table of contents is the first 
 module in the hyperbook. It contains
 hypertext references to most major
 modules.
 
 Use table of contents to display the 
 main table of contents.
H0532
   The Keyword Index is an hypertext
   module that contains links to key
   references within the hyperbook.
           
   Use to display the hypertext           
   index. 
H0533
 Use View Link (or press Enter) to open
 the hyperbook module referenced by the 
 text under the cursor. 
 
 When you open the referenced module,
 the current module will become the 
 parent module. You will be able to 
 return to your current location by 
 pressing the Escape key.
H0535
 The Search Results module contains
 a list of matches to one or more
 searches. Each of the listed
 modules is a hypertext reference
 to the matching module.
 
 Use Search Results to display the 
 Search Results module.

 To perform a search, choose Search 
 from the Search menu.
H0536
The History module is a special 
hypertext module that lists references
to all modules that you have displayed
since starting the program.
H0537
 The notepad is a special text only           
 module that you can use to record
 notes. 

 Hint:  The notepad provides an easy 
        to use method of recording 
        information from numerous 
        modules. Text can be copied
        into the notepad and the 
        notepad can be saved into
        and ASCII text file for use
        in another program.
H0538
 Use Bookmarks to display the           
 bookmarks module.
 
 The Bookmarks module contains a list 
 of hypertext references to modules that
 you have chosen to remember. You can
 create up to 1024 bookmarks.
           
 Hints: To create a bookmark, choose
        Create Bookmark from the Edit
        menu.
 
        To delete a bookmark place the
        cursor on the line containing 
        the bookmark and press Ctrl+Y. 


H0541
Use Find (or press Ctrl+F) to look for 
a text string in the current module. 
  
You can specify an case sensitive match 
or a whole word match.

Find scans the module from the current
cursor location to the end of the module.
 
 Hints: Find remembers the criteria
        specified the last time Find 
        or Search was used. 
        
        After a search, use Find Again 
        (Ctrl+G) to position the 
        cursor to the exact point 
        in this module where the 
        match was identified.
        
        Finds recognize hyphenation 
        and considers hyphenated words 
        to be a match.
H0542
 Use Find Again (or press Ctrl+G) to 
 repeat the most recent Find command.

 Find Again scans the module from the 
 current cursor location to the end of 
 the module.
 
 Hint:  Find Again remembers the 
        criteria specified the last 
        time Find or Search was used.
        
        If you have just performed a
        search, use Find Again (Ctrl+G)
        to position the cursor to the
        exact point in this module where
        the match was identified.

        You can also press F3 to invoke
        this function.
H0544
 Use Search (or press Ctrl+S) to 
 scan through a group of modules and
 generate a list of modules containing
 a match.
 
 You can search 
        . The history
        . Previous Search Results
        . Referenced modules
        . All modules.
 
 Search generates and displays a 
 hypertext list of modules containing 
 the target text.
 
 Search recognizes hyphenation and 
 considers hyphenated words to be 
 a match.
H0551
Use Prev Module (or press F5) to display
the previous consecutive module in the 
hyperbook.

H0552
 Use Next Module (or press F6) to 
 display the next consecutive module 
 in the hyperbook.
H0553
Use Prev Reference to display the 
previous module that can be opened from 
the parent module. The parent module is
the module that contains the hypertext
reference that was used to open the
current module.
This function does the same thing as if
you pressed Escape, Shift+Tab and Enter. 

H0554
Use Next Reference to display the next
module that can be opened from the 
parent module. The parent module is
the module that contains the hypertext
reference that was used to open the
current module.

Hint:   Using Next/Prev Reference after
        opening a module from the Search
        Results module provides a quick
        method of moving between those
        modules containing a match.

        If you load a module from the 
        Bookmark List you will be able
        to jump quickly between modules
        for which you have created a
        bookmark using the Next/Prev
        Reference feature.
H0556
Use Back (or press Escape) to close the 
current module and return to the parent 
module at the point at which this module 
was opened.
H0557
Use Top or press Ctrl+home to close the 
current module and return to the highest 
level module.
 
In most hyperbooks, this will return you
to the table of contents.
H0561
 Use Help to display a hyperbook that
 provides instructions for using
 this program.
H0562
                 
                 About
 
   Displays information about the 
   hyperbook and the program.

H0103

Use to select the name for saving the
current module or selected text.

File Name
Type the path and file name.

( ) Current Module
Save the text of the entire module.

( ) Selected text
Save only the highlighted text.
H1031
       File already exists

The file already exists in the specified
directory.

H0104
Use to print all or part of a hyperbook.

( ) All modules
Print all modules in this hyperbook

( ) Referenced modules
    Print current module and those that
    can be opened from the current 
    module.

( ) Current Module
    Print the current module

( ) Selected text
    Print only the highlighted text

( ) Selected modules
    Print the highlighted text and all
    modules that can be opened from
    within the highlighted range.

Printers
( ) Generic
    Text only teletype printer

( ) Epson
    Epson or epson compatible dot
    matrix printer

( ) IBM PPDS
    IBM dot matrix or laser printer

( ) HP Laserjet
    Hewlett Packard laserjet, deskjet or
    other HP compatible laser printer

( ) Postscript
    Printer that supports Adobe
    postscript.

H0105
Use to search for a text string.

[ ] Match upper/lowercase
    performs a case sensitive search.

[ ] Whole word
    selects matches only when the target
    text contains a whole word that is
    surrounded by spaces or punctuation.

[ ] Forget past results
    clears the search results screen
    before searching.

[ ] Quick search
    find matches in all modules which
    contain all words in the phrase, 
    regardless of order or location.
    If not checked, will match only if 
    the exact phrase is found.

( ) History
    search only modules that have been
    displayed since starting the program

( ) Search results
    search all modules that are listed
    in the current search results.

( ) Referenced modules
    search modules that can be opened
    from hypertext links in this module.

( ) All modules
    Search all modules in the hyperbook
H9999

